Settings And Functions - Viking VBI7360 Use & Care Manual

Settings and Functions

I n order for your new refrigerator to work properly, it is important that you
understand its various features, controls, and how to use them.
Power On/Off Switch
Your unit is shipped with the power switch on. When fi rst plugged in, the display will
fl ash. Push any button to initiate display.
The power on/off switch is located to the left of the center behind the access panel. It
is used to turn the power off when cleaning or servicing the refrigerator.
To turn power off , remove the access panel. Press the power on/off switch to the off
position.
To turn power on, press power on/off switch to the on position. Replace access
panel.
IMPORTANT: Be sure the power on/off switch is in the on position after cleaning or
servicing.
(Select Models only) Viking Range, LLC Connect App enables connectivity from a mobile phone to monitor
temperatures, settings, and allows for various alerts to be sent to the phone. If the NIC Enabled is set to on, the icon
will illuminate blue. If not enabled, the icon will remain white.
Enabling the lock feature will prevent the use of any other keypad operation. When the lock is enabled, the
lock keypad will illuminate blue. The enabled status of the lock is not retained after power loss. To disable
the lock feature press the lock keypad again. When the lock is disabled, the icon will illuminate white.
Max refrigerator mode adjusts the refrigerator temperature to the coldest setting for four hours, at the end of which the
refrigerator's temperature automatically returns to its previous setting. To activate the max refrigerator mode, simply
press the "MAX REF" button. The "MAX REF" light will glow to let you know you've turned on the max refrigerator mode.
To deactivate the max refrigerator mode before the end of the four hour cycle, press the "MAX REF" button and the blue
illumination will go out.
Temperature Change Button. When you fi rst plug your new refrigerator in, you will fi nd that the refrigerator is factory
set at 38° F in the refrigerator and 0° F in the freezer. Wait 24 hours after plug-in for the cabinets to reach this setting.
After 24 hours, you may adjust controls as desired. To change from °F to °C, press the "°F/ °C" button, To change back,
press the °F/ °C button again.
Sabbath mode is used to disable interior lights and alarms for observance of the Sabbath. To enter Sabbath mode, press
the "SAB" button. Button will illuminate blue to indicate "SAB" mode is active. When your refrigerator is in Sabbath
mode, interior lights, display (excluding SAB indicator, temperature, and compartment indicator), and alarms are
disabled. The "SAB" button will illuminate blue. If your refrigerator loses power while in Sabbath mode, it will return to
the Sabbath mode when power is reestablished. To exit the Sabbath mode, press the "SAB" button.
Vacation mode will optimize refrigerator energy consumption during periods of non-use. Press the "VAC" button to
activate. Press again to return refrigerator to normal operation.
6
access panel
B