Headset Controls; Troubleshooting; System Reset - Plantronics Explorer 260 User Manual

HEADSET CONTROLS

KEY FEATURE
Making/answering/ending
calls
Switching an active call
from headset to phone or
phone to headset
Hands-free features
KEY FEATURE Action
Activate last Double short key press
number redial
Activate voice dial Long key press
Call reject Long key press
Features must be supported by Bluetooth device or service provider.
|
8
Action Tone
Short key press High tone
Long key press High tone
followed by low
Tone
High tone for each
key press
High tone followed by
low
High tone followed by
low

TROUBLESHOOTING

Problem Solution
My headset does not work • See page 5 "Pairing".
with my phone.
• Perform a reset on Pulsar 260 as described below.
Callers cannot hear me. • Headset is muted. Press the mute button on the pod
to unmute the microphone.
• Ensure pod is powered on and headset is paired
with audio device. See page 5 "Pairing".
Callers say my voice is too Ensure that microphone is pointing towards your
quiet. mouth.
I cannot hear caller/dial • Pod is turned off. Check the indicator light for
tone or audio sound. status.
• Headset is out of range. Walk to within 10 metres of
the phone and check the Bluetooth link on your
phone's display.
• Battery is dead. Charge your battery using the AC
power adapter supplied.
• Listening volume is too low. Press the volume/mute
button to increase the sound heard in the headset.
I cannot hear music from • Pod must be turned on and connected to the
my powered speakers/Hi-Fi powered speakers/Hi-Fi with the audio-out cable.
when using the audio-out
• Check music player on Bluetooth phone is switched
cable.
on and Pulsar 260 is the active Bluetooth device.

SYSTEM RESET

A reset button is located
(recessed) behind the clothing
clip.
To reset:
1. Remove clip as shown at
right.
2. Press and release button
using a pen.
1
2
|
9