Fit headset Daily use Plantronics software Connect PC and call Active Noise Cancelling Incoming/Outgoing calls Adjust your headset volume Mute a call Plantronics Hub Software Plantronics Control Panel Applications tab Preference tab About tab Plantronics Manager Pro Troubleshooting Headset Smart Sensors...
Welcome Congratulations on purchasing your new Plantronics product. This guide contains instructions for setting up and using your Blackwire 725 headset. Please refer to the safety instructions for important product safety information prior to installation or use of the product.
Basics Headset inline control icons Function Answer/End button Incoming call Answers or ends a call Flashes green On a call Solid green Volume button Increases the listening volume Decreases the listening volume Mute/Unmute button Solid red when muted Mutes/unmutes the headset microphone Active Noise Cancelling (ANC) ANC will reduce unwanted noise.
Wearing your headset Fit headset Slide the headband until it fits comfortably over both ears. If still too tight, stretch the headband for better comfort. For optimal voice clarity, bend the boom and place the microphone close to mouth.
Plantronics 725. • PC audio setup for Windows 7 and Windows 8 Go to Control Panel > Sound > Playback tab and set the Plantronics 725 device as the Default Communications Device. • PC audio setup for Windows XP Go to Control Panel >...
Press the volume down button on the headset inline control to decrease listening volume. Mute a call During a call, press the mute button on the headset inline control to mute the microphone. When mute is on, the mute LED is solid red (you will still be able to hear the caller). To turn mute off, press the mute button again.
To access the Plantronics Control Panel, load Plantronics Hub software by visiting plantronics.com/software and click on the download button. To start this utility, click Start > Programs > Plantronics > Plantronics Control Panel. Applications tab The Applications tab displays the status of Plantronics support for various applications such as...
Preference tab Allows you to set preferences for: • Media player Modify call action: Pause, Play, Mute or Do nothing • General use • Presence status based on wearing state (dependent upon softphone compatibility) When headset is put on, or removed, set presence to: Available, Busy, Do not disturb, Be right back or Offline About tab Provides online access to the user guide and support and displays your headset system's...
Plantronics Manager Pro Additional device management tools are available for IT Managers via Plantronics Manager Pro, which includes the following features: • Enable or disable device settings according to company policy or for regulatory compliance • Lock down settings so they cannot be changed by the user •...
Troubleshooting Headset I cannot hear caller. Listening volume is too low. Press the volume up button on the headset. The USB headset is not set as the default audio device. Use the audio settings in your sound control panel/preferences to select your headset as the default audio device.
• Under “Sound Playback”, change the default setting from your headset to your device choice. Supported Operating Systems: Windows Vista, Windows 7, Windows 8, 8.1 • Go to Control Panel > Sound > Recording tab. • Highlight your device choice, select the Set default button and click OK.
Need help?
Do you have a question about the C725 and is the answer not in the manual?
Questions and answers