Making/Answering/Ending Calls; Indicator Lights; Powering On/Off; Charging - Plantronics Explorer 260 User Manual

CHARGING

You must charge for 3 hours before fi rst use.
To charge, connect AC charger to pod mini-
USB socket.
Pod indicator light fl ashes red when charging
and changes to solid blue when fully charged.

POWERING ON/OFF

Press and hold power on/off switch for >2 seconds.
POD INDICATOR LIGHTS
Action Light
Charging Flashes red
Fully charged Solid blue
3 red flashes. =
Power/battery status
2 red flashes. =
1 red flash. =
Pairing/connect Flashes red and blue
Bluetooth pod connected Flashes blue
to headset
|
4
NOTE: Flashes red
when headset is
initially powered on.

PAIRING

To pair pod with phone:
Begin with pod powered on.
1. Press and hold both the mute/play/
pause button and the power on/off/
pairing button simultaneously. When
the indicator light fl ashes red and
blue, release buttons.
2. While pod is fl ashing red and blue,
use the phone menu to search for
Bluetooth devices and select "260
Plantronics".
3. When prompted for password, enter
0000.
Pod fl ashes blue when paired successfully.
For set up and pairing instructions with
Bluetooth devices other than mobile
phones, please consult your Bluetooth
device user guide.

MAKING/ANSWERING/ENDING CALLS

To make a call:
Dial on phone; call transfers
automatically to headset.
To answer or end a call:
Briefl y press call control
button on headset.
To adjust volume:
+ –
Short press or buttons on
pod for incremental change, hold
for continuous change.
1
2
3
M2500 Plantronics
260Plantronics
M3000 Plantronics
Enter
password
0000
|
5