ABB RES670 Product Manual page 63

Phasor measurement unit RES670 ANSI
Customized
Product version: 1.2
GPS antenna and mounting details
GPS antenna, including mounting kits
Cable for antenna, (Appx. 65 ft)
Cable for antenna, (Appx. 131 ft)
Test switch
The test system COMBITEST intended for use with the IED 670
products is described in 1MRK 512 001-BEN and 1MRK
001024-CA. Please refer to the website:
www.abb.com/substationautomation
1 TRM Single busbar/2 TRMs Double busbar with 6 bays with
internal neutral on currents circuits (ordering number RK926
315–AN).
1 TRM Single busbar/2 TRMs Double busbar with 6 bays with
external neutral on currents circuits (ordering number RK926
315–DB).
1 TRM/2 TRM with internal neutral on currents circuits (ordering
number RK926 315–AM).
Protection cover
Protective cover for rear side of terminal, 6U, 1/1 x 19"
Combiflex
Key switch for settings
Key switch for lock-out of settings via LCD-HMI
Note: To connect the key switch, leads with 10 A Combiflex socket on one end must be used.
Configuration and monitoring tools
Front connection cable between LCD-HMI and PC
LED Label special paper A4, 1 pc
LED Label special paper Letter, 1 pc
ABB
for detailed information.
Quantity:
Quantity:
Quantity:
1 TRM/2 TRM with external neutral on currents circuits
(ordering number RK926 315–DC).
Test switches type RTXP 24 is ordered separately. Please refer
to Section "Related documents"
documents.
RHGS 6 Case or RHGS 12 Case with mounted RTXP 24 and
the on/off switch for dc-supply are ordered separately. Please
refer to Section "Related documents"
corresponding documents.
Quantity:
Quantity:
Quantity:
Quantity:
Quantity:
1MRK511254-BUS B
1MRK 001 640-AA
1MRK 001 665-AA
1MRK 001 665-BA
for reference to corresponding
for reference to
1MRK 002 420-AA
1MRK 000 611-A
1MRK 001 665-CA
1MRK 002 038-CA
1MRK 002 038-DA
63