ABB RES670 Product Manual page 60

Phasor measurement unit RES670 ANSI
Customized
Product version: 1.2
Transformer input module, ring lug terminals
Transformer input module, ring lug terminals
Note: One Analog digital conversion module, with time synchronization is always delivered with each Transformer input module.
Case size
When ordering I/O modules, observe the maximum quantities according to tables below.
Note: Standard order of location for I/O modules is BIM-BOM-SOM-IOM-MIM from left to right as seen from the rear side of the IED, but can also be
freely placed.
Note: Maximum quantity of I/O modules depends on the type of connection terminals.
Case sizes
1/1 x 19", two (2) TRM
Case sizes
1/1 x 19", two (2) TRM
60
6I+6V, 5A, 50/60 Hz
3I, 5A+3I, 1A+6V,
50/60 Hz
Maximum quantity of I/O modules
BIM IOM BOM/ MIM
SOM
11 6 4 4
Maximum quantity of I/O modules, with ring lug terminals, module limits see above
Maximum in case Possible locations for I/O modules
with ringlugs
5 P3, P5, P7, P9, P11
1 2
Qty:
1 2
Qty:
Maximum in case
11 (max 4 BOM+SOM
+MIM)
1MRK511254-BUS B
1MRK 002 247-AD
1MRK 002 247-AF
1MRK 000 151-ND
1MRK 000 151-ND
ABB