Table of Contents
Advertisement
All modules support hot insertion and removal. When the module is replaced the switch must be
activated and then the MOD FAIL LED must be extinguished before the module is removed. It is also
possible to deactivate the module from the Cisco Edge Craft terminal. A special tool, the Card
Extraction Tool
(Figure
Figure 7
Card Extraction Tool
MOD
FAIL
MOD
FAIL
The following service modules are described in the ONS 15305 Installation and Operations Guide:
•
Octal optical S-1.1 module (S1.1-8-LC)
•
Dual optical S-4.1 module (S4.1-2-LC)
•
Single optical S-16.1 module (S16.1-1-LC)
•
Dual optical LAN 1000BaseLX module (GigE-2-LC)
7) is needed to remove the module.
CLASS 1
LASER
PRODUCT
MOD
OUT
IN
DIS
CLASS 1
LASER
PRODUCT
MOD
OUT
IN
DIS
19
Hide quick links:
Advertisement
Table of Contents
