Cisco ONS 15305 Quick Installation Manual page 24

Accessing the ONSCLI
The ONSCLI is accessed through the VT100 port or through an IP connection (Telnet). The serial
connection communications parameters are fixed (
Table 2 EIA/TIA-232 Parameters
Parameter
Speed
Data bits
Parity
Stop bits
Flow control
The VT100 port (Console port) for the ONS 15305 is provided using a RJ-45 connector. The cable for
connecting the VT100 port to the serial port on the PC are provided.
Invoke ONSCLI
Step 1 Connect the VT100 interface of the network element to a free COM port of the PC running
the Cisco Edge Craft application.
Step 2 A VT100 terminal application is available from the Cisco Edge Craft Logon window. Select
Program > Cisco Edge Craft> Cisco Edge Craft.
Step 3 Double-click the VT100 icon in the lower right corner of the Logon window (Figure 8).
24
Value
19200 bps
8
None
1
None
Table 2) . VT100 terminal codes are used.