Installation Materials For Ons 15305 - Cisco ONS 15305 Quick Installation Manual

Advarsel
Aviso
¡Advertencia!
Varning!
9

Installation Materials for ONS 15305

Several items are needed to complete the installation of the ONS 15305. Some of these items are
supplied by Cisco and some need to be supplied by the user. The following are the Cisco-supplied
materials:
• 48 V power connector (accompanying DC module)
• ESD wrist strap with cable
• Release hook (for service module extracting)
• 2 brackets (19 in. [482.6 mm])
• 2 Brackets (ETSI)
• Mounting screws and washer lock
• 4 rubber feet for table placing
• Connection cable for connection between ONS 15305 (EIA/TIA-232) and PC/laptop (RJ-45)
The following materials, tools, and equipment are recommended but are not supplied with the
ONS 15305:
• Fuse panel
• Power cable (from fuse to power connector), #18 AWG (0.75 mm )up to #16 AWG (1.5 mm )with
four rigid wires
• Single-mode cable with LC connectors
• Fiber connector inspection instruments (Cisco recommends Video Microscopes)
10
Det kan forekomme usynlig laserstråling fra fiber eller kontakter som er
frakoblet. Stirr ikke direkte inn i strålene eller se på dem direkte gjennom
et optisk instrument.
Radiação laser invisível pode ser emitida de conectores ou fibras
desconectadas. Não olhe diretamente para os feixes ou com instrumentos
ópticos.
Es posible que las fibras desconectadas emitan radiación láser invisible.
No fije la vista en los rayos ni examine éstos con instrumentos ópticos.
Osynlig laserstrålning kan avges från frånkopplade fibrer eller kontaktdon.
Rikta inte blicken in i strålar och titta aldrig direkt på dem med hjälp av
optiska instrument.