Installation - Electrolux EHL4CN User Manual

28 www.electrolux.com
11.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is on
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

12. INSTALLATION

WARNING!
Refer to Safety chapters.
12.1 Installing the oven under a
work surface
Installation into flammable
material must agree with NIN
SEV 1000 (Swiss Association
of the Cantonal Fire
Insurance Companies) fire
protection guidelines and
regulations.
A = appliance, N = recess
1. Install the hob according to the
installation instruction number
374307900 / 374307901.
Before insert the oven into cabinet's
recess make sure to carry out the
hotplate socket and use the correct
socket connections. There is no need
to use a separate earthing.
2. Pull the appliance drawer out as far as
it goes and remove it.
3. Use the side handles to hold the oven
and slide it flush into the recess.
Make sure the cable is free when you
slide the appliance.
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
.........................................
.........................................
.........................................
A
A
20
D
mm
A 549 mm
N 550 (-0,+1) mm
4. Use a minimum of 2 screws to attach
the oven on the 2 sides (A).
When installing next to a wood-fuelled
boiler, a heatproof and heat-insulating
plate must be mounted at the height
of the appliance and at least 30 cm
deep.
600 mm
B
~50 mm
A
N 762 + 3
A
A 757
A
A
435
160
mm 170
mm
mm
A 767 N 780
mm mm
mm
mm