Connecting Audio Inputs; Balanced Vs. Single Ended Input; Power Conditioners; External Control Voltage - Bryston 3B3 Owner's Manual

Connecting Audio Inputs

Balanced vs. Single Ended Input

Power Conditioners

4B & 3B
3 3

External Control Voltage

Note:
Insert stripped ends of insulated wires revealing
approx. 1/4" of bare, stranded copper wire between
24 and 12 AWG (.5mm to 2mm dia.) into open elevator
style wire clamps & tighten with a slot screw driver.
Do not over tighten or wires may eventually come
lose. Maximum tightening torque is 4.5 lb-in (0.5Nm)
REMOTE POWER TURN-ON
PLUG-IN CONNECTOR
Figure 1
5