Bryston 3BSST Owner's Manual
  1. Manuals
  2. Brands
  3. Bryston Manuals
  4. Amplifier
  5. 3B SST C
  6. Owner's manual

Bryston 3BSST Owner's Manual

Sst series stereo power amplifier
Hide thumbs Also See for 3BSST:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
3B
4B
POWER AMPLIFIER
OWNER'S MANUAL
UPDATED 2007-01-29
SST
SST

Advertisement

Table of Contents
loading

Related Manuals for Bryston 3BSST

Summary of Contents for Bryston 3BSST

  • Page 1 POWER AMPLIFIER OWNER’S MANUAL UPDATED 2007-01-29...

  • Page 2: General Information

    Speaker wires should be as short as practical. Use quality wire, and if runs are more than 3 meters use at least 12 gage wire. The speaker binding posts will accept wire up to 3 gage in size. Bryston will custom build cables for your applica- tion.

  • Page 3: Front Panel

    When the channel has cooled to a safe operating condition the channel will return to normal operation. Persistent Thermal shutdown indicates steps need to be taken to increase airflow across the channel or channels heat sink. ( Also see installation section on ventilation ). 3Bsst & 4Bsst FRONT PANEL POWER AMPLIFIERS...
  • Page 4 The individual setting is for two channel operation. Bridge mode is for mono operation. 6. Level Control. (pro models only) The level control will attenuate the input signal level from 0dB through -14dB. 3Bsst & 4Bsst Figure 1 POWER AMPLIFIERS...

  • Page 5: Operation

    Gold plated locking banana plugs are available from Bryston. 2. Spade lugs provide high contact area and secure fastening. Lugs should be gold plated.

  • Page 6: Power Control

    The SST control circuitry itself draws less than 2 mA from the control current when operating. OPERATION contd. Control Voltage source 4 to 12v ac or dc Bryston part number CO-110A-11104 3Bsst & 4Bsst POWER AMPLIFIERS Control voltage wire preparation for screw terminals separate 1”...

  • Page 7: Technical Specifications

    2 channels @ 500W @ 4 ohms - 2100 Watts 2033 Btu/Hr. Max. Heat Dissipation 4 ohms - 1053 Watts Bridged @ 900W @ 8 ohms - 2057 Btu/Hr. Max. Heat Dissipation 8 ohms - 3Bsst & 4Bsst POWER AMPLIFIERS 4Bsst 170 Watts 580 Btu/Hr. 2320 Btu/Hr. 3750 Btu/Hr.

  • Page 8: Important Safety Instructions

    Bryston authorized dealer to qualify for warranty service. The warranty is transferable from the original owner to a subsequent owner as long as a copy of the bill-of-sale from the original authorized Bryston dealer accompanies the re-sale. The copy of the bill of sale to any subsequent owner need ONLY include the Name of the Bryston Authorized Dealer and the Model and Serial number of the Bryston product The warranty will only be honored in the country of the original purchase unless otherwise pre-authorized by Bryston.

This manual is also suitable for:

4bsst

Table of Contents