Kyocera m9300 Basic Manual page 97

To pair your device with another Bluetooth device:
1.
Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap
Your device must be visible to successfully pair
with an external device.
3.
Tap Scan for devices
of discovered in-range Bluetooth devices.
4.
Tap a device you would like to pair with, enter a
passkey, if necessary, and tap
Note:
Some devices may be paired by tapping
option is available.
5.
The device will be paired when it enters the same
passkey.
Note:
If you're asked for a passcode and you're not sure what
it is, try "0000" or "1234." If neither of these works,
consult the Bluetooth device's documentation.
Due to different specifications and features of other
Bluetooth-compatible devices, display and operations
may be different, and functions such as transfer or
exchange may not be possible with all Bluetooth-
compatible devices.
Discoverable
. Your device will display a list
OK .
Pair when the
Note:
Pairing between two Bluetooth devices is a one-time
process. Once a pairing has been created, the devices
will continue to recognize their partnership and
.
exchange information without having to re-enter a
passkey again.
To disconnect Bluetooth devices:
1.
Press
Home
Wireless & networks > Bluetooth settings
2.
Under the Bluetooth devices section, tap and hold
the connected device.
3.
On the options menu, tap
To unpair Bluetooth devices:
1. Press
Home
Wireless & networks > Bluetooth settings
2.
Under the Bluetooth devices section, tap and hold
the paired device.
3.
On the options menu, tap
Disconnect & unpair
> Menu > Settings
.
.
Disconnect
> Menu > Settings
.
or 
Unpair
(when connected).
2I. Bluetooth
> 
> 
85