Bluetooth; Turning Bluetooth On And Off - Kyocera m9300 Basic Manual

2I. Bluetooth
Turning Bluetooth On and Off (page 83)
Using the Bluetooth Settings Menu (page 84)
Pairing Bluetooth Devices (page 84)
About Bluetooth
Bluetooth is a short-range communications technology
that allows you to connect wirelessly to a number of
Bluetooth devices, such as headsets and hands-free
car kits, and Bluetooth-enabled handhelds, computers,
and wireless phones. The Bluetooth communication
range is usually up to approximately 30 feet.

Turning Bluetooth On and Off

By default, your device's Bluetooth feature is set to
Bluetooth operates in three modes:
: Bluetooth is turned on. Your device can detect
On
other Bluetooth devices but other devices cannot
detect your device.
: Bluetooth is turned on. Your device can
Discoverable
detect other Bluetooth devices and other devices
can also detect your device for 120 seconds.
: Bluetooth is turned off. Information cannot be
Off
sent or received when Bluetooth is turned off.
Note:
Activating Bluetooth can drain your battery faster and
reduce your available usage times. It is recommended
that you turn it off when not needed.
To turn Bluetooth on:
1. Press
Home
Wireless & networks
2.
Tap the

Bluetooth

mark indicates this feature is enabled.) When
active, appears on the status bar.
To make your device discoverable, tap 
3.
Off .
Bluetooth settings
check box to enable other Bluetooth devices to
detect your device for 120 seconds.
> Menu > Settings
.
check box to turn on. (A check
, and then tap the Discoverable
2I. Bluetooth
> 
83