Table of Contents
Advertisement
Charging the Internal Battery
Keeping track of your battery's charge is important. If
your battery level becomes too low, your device
automatically turns off, and you will lose any
information you were just working on.
Always use a Sprint-approved or Kyocera-approved
battery charger, desktop charger, travel charger, or
vehicle power adapter to charge your battery.
1.
Plug the Micro B USB cable
into the device's charger/
accessory jack.
2.
Plug the other end of the
USB cable into the Wall/
USB Charger, and then
plug the Wall/USB Charger into a wall outlet.
A
solid red indicator light
charging.
A
flashing red indicator light
low.
A
solid green indicator light
fully charged.
WARNING:
Do not remove the battery while it is charging. Always
remove the charger from the wall outlet first before
removing the Micro USB cable from the device.
14
2A. Device Basics
means the battery is
means the battery is
means the battery is
With the Sprint-approved Li-Ion battery, you can
recharge the battery before it becomes completely run
down. With the use of the included battery charger, you
can charge a spare battery without having to be
inserted in the device. See "Charging the Spare
Battery" below.
Charging the Spare Battery
For added convenience, you can charge a spare
battery by using the included battery charger. When
your primary battery becomes discharged, a spare
battery can extend the battery life of your device.
To install the spare battery in the battery charger:
1.
Slide the charger cover in the direction of the arrow
until it locks in the fully open position.
2.
Insert the battery into the charger unit, making sure
the connectors align and gently press down to
secure the battery.
3.
Close the charger cover until you hear a click.
Advertisement
Table of Contents
