Starting / Stopping Samples; Delayed Start - Cantium Scientific MicroBio MB1 Operating Manual

Starting / Stopping Samples

Press the start button to start the sample process. When running the
display will countdown showing how many litres remain to be sampled. The
MicroBio MB1 will stop sampling when the required volume of air has been
sampled.
Press and hold the stop button at any time to stop sampling.

Delayed Start

Pressing and holding start will invoke the delayed start feature. This will
allow up to 60 minutes of delay, in 1 minute steps, before sampling starts.
⊕ ⊖
Simply use the or keys to set the amount of delay required.
When ready, press start to initiate the countdown. The display will then
count down the time before sampling will start. At any time pressing stop
will stop the process.
14