Assembly - Honda 450S CRF Moto X Bike Owner's Manual

OWNERS MANUAL
9

ASSEMBLY

GETTING STARTED
Remove all cardboard and bubble-wrap and again dispose of in a responsible manner. You should be careful not to scratch the
paintwork or otherwise damage your bike during this process.
FRONTWHEEL
1. Make sure the brakes are loose enough to allow the wheel to pass through the brake pads easily. (2)
2. Place wheel into fork drop outs. (1)
3. Install retaining washers with raised lip pointed towards the fork and insert into the small hole of the fork blade. (3)
4. Install axle nut and tighten.(Make sure the wheel is centered between the fork blades.)
5. Spin the wheel to make sure that it is centered and clears the brake shoes. Tighten the brakes if necessary.
6. Turn the bicycle upright.