Omron E5*D series User Manual page 332

6 Parameters
• Each parameter is enabled when the power is reset.
• Match the communications specifications of the E5@D and the host computer. If multiple
devices are connected, ensure that the communications specifications for all devices in
Function
the system (except the Communications unit number) are the same.
• Parameters in the Communications Level are displayed only for models that support
communications. Refer to the E5
No. H225) for details.
Protocol setting
Setting
Communications
Unit No.
Communications
baud rate
Communications
data length
Stop bits
Communications
parity
Send data wait
time
Write Mode
*
 Related Parameter
See See
Communications Writing (Adjustment Level): Page 6-19
If the Protocol Setting parameter is set to one of the following settings, the setting parameters for
programless communications are displayed. Refer to the E5
Manual (Cat. No. H225) for details.
Protocol Setting = Host Link (FINS), MC Protocol (Format 4), or Dedicated Protocol (Format 4))
Parameter
Highest Communications
Unit No.
Area
First Address Upper Word
First Address Lower Word
Receive Data Wait Time
Communications Node
Number
Upload Settings 1 to 13*
Download Settings 1 to 13 dn01 to 13
Copy
6 - 98
Item Display
psel
u-no
bps
len
sbit
prty
sdwt
ramm
Writing with communications is enabled if you set the Protocol Setting parameter to Host Link
(FINS), MC protocol (format 4), or dedicated protocol (format 4).
Parameter
display
0 to 99
maxu
0 to 25
areaAREA
0 to 99
adrh
0 to 9999
adrl
100 to 9999
rwat
0 to 99
unit
up01 to 13 0 to 108
30 to 108
off, all, 1 to 199
copy
D Digital Controllers Communications Manual (Cat.

Set values
CompoWay/F
cwf/
Modbus
mod
Disabled
none
Component communications
fins
Host Link (FINS)
mcp4
MC Protocol (format 4)
fxp4
Dedicated protocol (format 4)
0 to 99 0 to 99
9.6/19.2/38.4/57.6/ 9.6/19.2/38. 4/57.6/115.2
115.2 (Kbps) (kbps)
7 or 8 bits 7 or 8 bits
1 or 2 bits 1 or 2 bits
None, Even, Odd
none/eVen/odd
0 to 99 0 to 99 (ms)
Backup Mode
bkup
RAM Write Mode
ram
@
D Digital Controllers Communications
Display
E5@D Digital Temperature Controllers User's Manual (H224)
Settings Default
cwf
1
9.6
7
2
eVen
20
bkup
Settings Default
0 to 99 0
0 to 25 0
0 to 99 0
0 to 9999 0
100 to 9999 ms 1000
0 to 99 0
0 to 108
30 to 108
OFF