Table of Contents
Advertisement
Broadband Router User Guide
E-Mail Reports
Send E-mail alert
E-mail Logs
Send
E-Mail Address
E-mail Address
Subject
SMTP Server
Port No.
If enabled, an E-mail will be sent immediately if a DoS
(Denial of Service) attack is detected. If enabled, the E-mail
address information must be provided.
You can choose to have the logs E-mailed to you, by ena-
bling either or both checkboxes. If enabled, the Log will be
sent to the specified E-mail address. The interval between
E-mails is determined by the "Send" setting.
Select the desired option for sending the log by E-mail.
When log is full - The time is not fixed. The log will be
sent when the log is full, which will depend on the vol-
ume of traffic.
Every day, Every Monday ... - The log is sent on the
interval specified.
If "Every day" is selected, the log is sent at the time
specified.
If the day is specified, the log is sent once per
week, on the specified day.
Select the time of day you wish the E-mail to be
sent.
If the log is full before the time specified to send it, it
will be sent regardless.
Enter the E-mail address the Log is to be sent to. The E-
mail will also show this address as the Sender's address.
Enter the text string to be shown in the "Subject" field for the
E-mail.
Enter the address or IP address of the SMTP (Simple Mail
Transport Protocol) Server you use for outgoing E-mail.
Enter the port number used to connect to the SMTP Server.
The default value is 25.
74
Advertisement
Table of Contents
