Broadband Router User Guide
Buttons
Connect
Disconnect
Clear Log
Refresh
Connection Status - Telstra Big Pond
An example screen is shown below.
Data - Big Pond Screen
Connection
Physical Address
IP Address
If not connected, establish a connection to your ISP.
If connected to your ISP, hang up the connection.
Delete all data currently in the Log. This will make it easier to
read new messages.
Update the data on screen.
Figure 30: Telstra Big Pond Status Screen
The hardware address of this device, as seen by remote
devices. (This is different to the hardware address seen by
devices on the local LAN.)
The IP Address of this device, as seen by Internet users. This
address is allocated by your ISP (Internet Service Provider).
44