Table of Contents
Advertisement
Default Schedule Screen
This screen is displayed when the Define Schedule button on the Access Control
screen is clicked.
This schedule can be (optionally) applied to any Access Control Group.
Blocking will be performed during the scheduled time (between the "Start" and
"Finish" times.)
Two (2) separate sessions or periods can be defined.
Times must be entered using a 24 hr clock.
If the time for a particular day is blank, no action will be performed.
Data - Default Schedule Screen
Day
Session 1
Session 2
Start Time
Finish Time
Figure 35: Default Schedule Screen
Each day of the week can scheduled independently.
Two (2) separate sessions or periods can be defined. Session
2 can be left blank if not required.
Enter the start using a 24 hr clock.
Enter the finish time using a 24 hr clock.
Advanced Features
53
Advertisement
Table of Contents
