Table of Contents
Advertisement
Broadband Router User Guide
Options
This screen allows advanced users to enter or change a number of settings. For
normal operation, there is no need to use this screen or change any settings.
An example Options screen is shown below.
Data - Options Screen
Backup DNS
IP Address
TFTP
Enable Firm-
ware Upgrade
using TFTP
UPnP
Enable UPnP
Services
Allow Configu-
ration...
Figure 47: Options Screen
Enter the IP Address of the DNS (Domain Name Servers) here.
These DNS will be used only if the primary DNS is unavailable.
If enabled, TFTP (Trivial FTP) can be used to upgrade the
firmware in this device. This is normally not required; a Win-
dows utility is available for this purpose.
You must obtain the firmware upgrade file first; instructions
for using TFTP will be available with the upgrade.
UPnP (Universal Plug and Play) allows automatic discovery
and configuration of equipment attached to your LAN. UPnP
is by supported by Windows ME, XP, or later.
If Enabled, this device will be visible via UPnP.
If Disabled, this device will not be visible via UPnP.
If checked, then UPnP users can change the configuration.
If Disabled, UPnP users can only view the configuration. But
currently, this restriction only applies to users running Win-
dows XP, who access the Properties via UPnP. (e.g. Right -
click the Broadband Router in My Network Places, and se-
lect Properties)
76
Advertisement
Table of Contents
