Sony HT-NT5 Operating Instructions Manual page 68

Front L/Front R speaker block section
Speaker system
3-way speaker system, Acoustic
suspension
Speaker
Woofer: 60 mm cone type
Tweeter: 14 mm soft dome type × 2
General
Power requirements
120 V - 240 V AC, 50 Hz/60 Hz
Power consumption
On: 50 W
Standby mode: 0.5 W or less (For
details on the setting, see page 44)
[Quick Start/Network Standby] is set to
[Off] (default setting): 3 W
[Quick Start/Network Standby] is set to
[On] (all wired network ports
connected, all wireless network ports
activated): 7 W
Dimensions* (approx.) (w/h/d)
1,080 mm × 58 mm × 127 mm
(without grille frame, without wall
mounting brackets)
1,080 mm × 64 mm × 127 mm
(with grille frame, without wall
mounting brackets)
1,080 mm × 135 mm × 80 mm
(without grille frame, with wall
mounting brackets)
1,080 mm × 135 mm × 80 mm
(with grille frame, with wall mounting
brackets)
* Not including projection portion
Mass (approx.)
3.2 kg (without grille frame)
Compatible iPod/iPhone models
The compatible iPod/iPhone models are as
follows. Update your iPod/iPhone with the
latest software before using with the
system.
BLUETOOTH technology works with:
iPhone 6s Plus/iPhone 6s/iPhone 6 Plus/
iPhone 6/iPhone 5s/iPhone 5c/iPhone 5/
iPhone 4s/iPhone 4
iPod touch (6th generation)/iPod touch
(5th generation)
68
GB
Subwoofer (SA-WNT5)
POWER OUTPUT (reference)
130 W (at 4 ohms, 100 Hz)
Speaker system
Subwoofer speaker system, Bass
reflex
16 cm cone type
Power requirements
120 V - 240 V AC, 50 Hz/60 Hz
Power consumption
On: 25 W
Standby mode: 0.5 W or less
Dimensions (approx.) (w/h/d)
190 mm × 382 mm × 386 mm (not
including projection portion)
Mass (approx.)
8.1 kg
Wireless transmitter/
receiver section
Communication system
Wireless Sound Specification version
2.0
Frequency band
2.4 GHz (2.4000 GHz - 2.4835 GHz)
Modulation method
Pi/4 DQPSK
Design and specifications are subject to
change without notice.