Download Print this page

Specifications - J&M Corporation JAMP-330HC06 Installation And Operation Instructions

330w amplifier kit for 2006-2013 harley ultra/ street/electra glide fairing

Advertisement

Fig. G

Specifications

ROKKER® XXR 330w RMS
Full Range Class D Amplifier
Output Power (RMS) @ 1% THD 1000Hz 14.4V
Stereo @ 2ohms
Frequency Response -3dB
Important Programing Note: The amplifier gain & frequency response adjustments have been pre-set at our factory for this specific
Harley Davidson audio system application, using speakers with an impedance of 2-ohms, to provide maximum performance at highway
speeds. Should speaker impedance load change, alternate adjustments can be made by removing the small sticker that is placed over
the amplifier's input gain control screw.
2 x 165 watts RMS Continuous
20Hz - 31kHz Capable
S/NRatio
Separation
Input Sensitivity
Input Impedance
>88dB
.35V - 3.9V
20K

Advertisement

loading