Advertisement
FOR MODELS WITH A CB AND/OR SAT RADIO, CONTINUE
WITH STEPS (14) THRU (16), FOR BIKES WITHOUT A CB OR
SAT RADIO, PROCEED TO STEP (17).
14. Install the previously removed CB and/or SAT Radio
modules into the J&M lower mounting bracket and secure using
the (2) 8-32x1/4 screws provided. (these are the longer of the
remaining screws) (Figure I)
15. Position the lower bracket assembly below the factory radio
and secure using the (4) remaining 8-32x3/16 screws provided.
(Figure J) (Remove and re-secure any factory wiring attached
to the bottom of the radio using the tie-straps provided)
16. Re-connect the CB and/or SAT Radio harness and antenna
connectors.
17. Test the system for proper operation before reassembling
the fairing, realizing that full sound quality and fidelity will not
be heard until the outer fairing shell is completely reinstalled.
Note: To activate the front/rear fader feature of your
Harley HK radio, ask your dealer to reflash the audio
system for front/rear fade.
Specifications
ESPA-5000
Full Range Class G Amplifier
Output Power (RMS) @ 1% 1000Hz 14.4V CEA 2006
Stereo @ 4ohms
Stereo @ 2ohms
Frequency Response -3dB
Thank you for the confidence you have shown in J&M Corporation by
purchasing one of our innovative products.
If you have any question or comments about this product, you may
contact us at USA 1-520-624-7000 Monday thru Friday, 8:00AM
thru 5:00PM Mountain Standard Time.
4 x 75 watts @ 13 amps Eff 71%
4 x 125 watts @ 23 amps Eff 66%
1Hz - 69kHz
Fig. I
Fig. J
S/NRatio
Separation
Input Sensitivity
Input Impedance
1415 S. Cherry Avenue
Tucson, AZ 85713 U.S.A.
Tel (800) 358-0881
Website: http://www.jmcorp.com
E-mail:
audio@jmcorp.com
>90dB
>74dB
.35V - 3.9V
47.5K
Advertisement
