Subscribe to Our Youtube Channel
Related Manuals for J&M Corporation ROKKER JAMP-630HC06-SGP
Summary of Contents for J&M Corporation ROKKER JAMP-630HC06-SGP
- Page 1 ROKKER® XXRP 630w Amplifier Kit For 2006-2013 Harley® Street Glide with Lower/Rear Speakers JAMP-630HC06-SGP Installation and Operation Instructions...
-
Page 2: Product Description
Product Description These new ROKKER XXRP series amplifiers are fully This new J&M ROKKER XXRP DSP controlled 4-channel 630 programmable thru the internal digital signal processor (DSP) watt RMS fairing/rear speaker amplifier kit has been designed and come out of the box already dialed in for this specific specifically for use on the 2006-2013 Harley®... - Page 3 Fig. B Fig. C remove loosen remove Fig. D 6. Relocate the large plugs from the inside of the fairing braces Remove to the outside of the the fairing braces. (Figure D) Move outside fairing brace 7. Remove the (4) rubber grommets from the top of the factory radio.
- Page 4 Fig. F Power Harness FRONT Left Speaker Right Speaker Amplifier White/ Green/ Gray/ Green/ White Orange White Black White Orange White/ Green/ Gray/ Green/ Orange White Black Left Right White/ Green/ Brown Brown Green Brown Front Factory Speaker Harness Orange/White Acc.
-
Page 5: Specifications
FOR MODELS WITH A CB AND/OR SAT RADIO, CONTINUE Fig. G WITH STEPS (11) THRU (13), FOR BIKES WITHOUT A CB OR SAT RADIO, PROCEED TO STEP (14). 11. Install the previously removed CB and/or SAT Radio modules into the J&M lower mounting bracket and secure using the (2) 8-32x1/4 screws provided.
Need help?
Do you have a question about the ROKKER JAMP-630HC06-SGP and is the answer not in the manual?
Questions and answers