Haier DW12-PFE2-U Service Manual page 7

Serial Number: FA0510E0H00/FA05V0E0400 Version:00.00 Edition: 2007-3
Dishwasher
Model: DW12-PFE2-U/DW12-PFE2ME-U
Positioning the appliance
Positioning the appliance in the desired location. The back should rest against the wall
behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped
with water supply and drain hoses that can be positioned to the right or the left to facilitate
proper installation.
Leveling the appliance
Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the
dishwasher, making it level. In any case, the appliance should not be inclined more than 2°.
If the appliance is level, it will help ensure proper performance.
Cold water connection
Connect the water supply hose to a threaded 3/4 (gas)
connector, making sure that it is fastened tightly in
place (see .fig A).If the water pipes are new or have
not been used for an extended period of time, let the
water run to make sure that the water is clear and
free of impurities. If this precaution is not taken,
there is a risk that the water inlet can get blocked and
damage the appliance.
Page 7 / 38