Serial Number: FA0510E0H00/FA05V0E0400
Version:00.00
Edition: 2007-3
Dishwasher
Model: DW12-PFE2-U/DW12-PFE2ME-U
6. How to fill the salt
Salt
The hardness of the water varies from place to place. If hard water is used in the
dishwasher, deposits will form on the dishes and utensils.
The appliance is equipped with a special softener that uses a salt specifically designed to
eliminate lime and minerals from the water.
Loading the salt into the container
Always use salt intended for use with dishwashers.
The salt container is located beneath the lower rack
and should be filled as follows:
--When the low salt indicator "1" lights, you must fill
the salt.
--Remove the lower rack and then unscrew and remove
the cap from the salt container;
--If you are filling the container for the first time, fill it with
water;
--Place the end of the funnel (supplied) into the hole and
introduce about 2 kg of salt. It is normal for a small
amount of water to come out of the salt container.
--Carefully screw the cap back on.
Page 10 / 38