Cd Changer; Rotary Commander Rm-X4S - Sony CDX-GT980UI Operating Instructions Manual

CD changer

Selecting the changer
1 Press (SOURCE) repeatedly until "CD"
appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Unit number
Disc number
Playback starts.
Skipping albums and discs
1 During playback, push the multi way encoder
up/down.
Push the multi way encoder
To skip
up/down
album and release (hold for a
moment).
album within 2 seconds of first
continuously releasing.
discs repeatedly.
discs then, press again within 2
continuously seconds and hold.
Repeat and shuffle play
1 During playback, press (1) (REP) on the card
remote commander or (SHUF) on the unit
repeatedly until the desired setting appears.
Select To play
Repeat Disc
disc repeatedly.
Shuffle tracks in the changer in random
Changer order.
To return to normal play mode, select "Repeat
off" or "Shuffle off."
22

Rotary commander RM-X4S

Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
SO U N D
M O D E
D SP L
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
SOUND
PRESET/
DISC
SOURCE
VOL SEEK/AMS
The following controls on the rotary commander
require a different operation from the unit.
• ATT (attenuate) button
To attenuate the sound. To cancel, press again.
• SOUND button
To enter sound setting.
• PRESET/DISC control
The same as rotating the multi way encoder on
the unit (push in and rotate).
• VOL (volume) control
The same as the multi way encoder on the unit
(rotate).
• SEEK/AMS control
The same as pushing the multi way encoder
left/right on the unit (rotate, or rotate and hold).
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
To increase
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
D S P L
M O D E
S O U N D
ATT
MODE
DSPL
OFF
To decrease