USB device is overloaded.
t Disconnect the USB device, then change the source
by pressing (SOURCE).
t Indicates that the USB device is out of order, or an
unsupported device is connected.
The unit is reading all track and album information on
t Wait until reading is complete and playback starts
automatically. Depending on the disc structure, it
may take more than a minute.
The CD unit, CD changer or USB device cannot be
operated due to a problem.
t Press the RESET button (page 6).
" or "
During reverse or fast-forward, you have reached the
beginning or the end of the disc and you cannot go any
The character cannot be displayed with the unit.
*1 If an error occurs during playback of a CD, the disc
number of the CD does not appear in the display.
*2 The disc number of the disc causing the error
appears in the display.
If these solutions do not help improve the situation,
consult your nearest Sony dealer.
If you take the unit to be repaired because of CD
playback trouble, bring the disc that was used at the
time the problem began.