Installation instructions
Step 1: Check the door balance
1 Hold the top of the dishwasher firmly.
2 Open the door slowly, then release it. If the door drops, increase the spring tension. If the door closes,
decrease the spring tension.
3 Continue moving the spring pin until the door is balanced. Adjust both springs to the same tension.
10
NS-DWH2BS8/NS-DWH2SS8/NS-DWR2BS8/NS-DWR2WH8/NS-DWR2SS8
Increase
Decrease
www.insigniaproducts.com
Caution
• Opening the door of your dishwasher before it is
installed will cause it to tip forward. Do not open the
door until you are ready to install your dishwasher.
• If it is necessary to open the door, hold the top of the
dishwasher securely with one hand and hold the door
with the other hand.