Removing The Slide Cam; Removing The F.lock Lever And Slide Cam - JVC KW-XG56TU Service Manual

3.2.6 Removing the slide cam (L) (See Fig.11 to 13)
• Remove the MECHANISM CONTROL BOARD assembly, top
cover and mechanism section.
(1) From the top side of the mecha frame, remove the screw F
attaching the cam cover. (See Fig.11.)
(2) Take out the cam cover from mecha frame in an upward
direction. (See Fig.11.)
F
Mecha frame
(3) Take out the slide cam (L) in the direction of the arrow.
(See Fig.12.)
Slide cam(L)
Cam cover
Fig.11
Mecha frame
Fig.12
Reference:
When attaching the slide cam (L), apply grease to the
section h. (See Fig.13.)
h
h
Slide cam(L)
h
3.2.7 Removing the F.lock lever and slide cam (R) (See
Fig.14 and 15)
• Remove the MECHANISM CONTROL BOARD assembly, top
cover and mechanism section.
(1) From the top side of the mecha frame, take out the slide
cam (R) assembly in an upward direction. (See Fig.14.)
(2) Rotate the F.lock lever in the direction of the arrow 1, and
then take out the direction of the arrow 2. (See Fig.14.)
h
F.lock lever
h
Mecha frame
h
h
Slide cam(L)
h
h
h
h
Fig.13
Slide cam(R) assembly
2
1
h
Link arm
h
Fig.14
(No.MA471<Rev.005>)1-13
h