Table of Contents
Advertisement
"Set" (Menu) Mode
17 DT A/M
Function: Enables/Disables the DTMF Autodialer feature.
Available Values: MANUAL / AUTO
Default: MANUAL
18 DT DLY
Function: Setting of the DTMF Autodialer's TX Delay Time.
Available Values: 50 / 250 / 450 / 750 / 1000 ms
Default: 450 ms
19 DT SET
Function: Loading of the DTMF Autodialer Memories.
See page 28 for details.
20 DT SPD
Function: Setting of the DTMF Autodialer Sending Speed.
Available Values: 50 (high speed) / 100 (low speed) ms
Default: 50 ms
21 EDG.BEP
Function: Enables/Disable the Band-edge beeper while scanning.
Available Values: ON / OFF
Default: OFF
22 INT CD
Function: Selects the Access Numbers (DTMF digits) for WIRES™ Internet linking.
Available Values: DTMF 0 - DTMF 9 / DTMF A - DTMF F
Default: DTMF 1
23 INT MD
Function: Selects the Internet Link Connection mode.
Available Values: SRG / FRG
Default: SRG
24 INT.A/M
Function: Enables/Disables DTMF Autodialer feature while using the Internet Connec-
tion feature.
Available Values: MANUAL / AUTO
Default: MANUAL
25 INT.SET
Function: Selects the memory register for an Access Number (DTMF code) for non-
WiRES Internet Link System access.
Available Values: F0 - F9
Default: F1
26 LOCK
Function: Selects the Control Locking Lockout combination.
Available Values: KEY / DIAL / K+D / PTT / K+P / D+P / ALL
Default: OFF
Note: "K" = "Key;" "D" = "Dial;" and "P" = "PTT".
66
FT-2980R Operating Manual
Hide quick links:
Advertisement
Table of Contents
