Yaesu FT-2980R Operating Manual page 10

Front Panel Controls & Switches
[ REV ( DW )] Key
During split-frequency operation, such as through a repeater, this key re-
verses the transmit and receive frequencies.
Press and hold in this key for one second to activate the Dual Watch fea-
ture, described in the Operation chapter ("PRI" will be displayed on the
LCD, indicating "Priority Channel" monitoring).
[ LOW ( A/N )] Key
Press this key momentarily to select the transmitter power output level.
The available power levels are:
LOW1 (5 W) à LOW2 (10 W) à LOW3 (30 W) à HIGH (80 W)
To toggle the display between indication of the frequency and the channel's
Alpha/Numeric label, press and hold in this key for one second while receiv-
ing on that memory channel.
[ D/MR ( MW )] Key
Press this key momentarily to switch the frequency control among the VFO,
Memory System, and Home channel.
Press and hold in this key for one second to activate the Memory Storage
mode.
DIAL Knob
This 24-position detented rotary switch is used for tuning, memory selection
and most function settings. The microphone [ UP ] / [ DWN ] buttons duplicate
the functions of this knob.
Display
The main digits on the display may show the operating frequency, memory
name, or any of many parameters during Menu setup.
6 FT-2980R Operating Manual