Yaesu FT-2980R Operating Manual page 69

10 CLK.SFT
Function: Shifting of the CPU clock frequency.
Available Values: ON / OFF
Default: OFF
This function is only used to move a spurious response "birdie", should it fall on a de-
sired frequency.
11 CW ID
Function: Enables/Disables the CW identifier during ARTS Operation.
Available Values: ON / OFF
Default: OFF
12 CWTRNG
Function: Enables/Disables the CW Training feature and selects the sending speed of
the Morse Code groups.
Available Values: 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 15 / 17 / 20 / 24 / 30 / 40 WPM
/ OFF or 20 / 25 / 30 / 35 / 40 / 45 / 50 / 55 / 60 / 65 / 75 / 85 / 100 /
120 / 150 / 200 CPM
Default: OFF
Note: To switch units between "WPM" and "CPM", just press the [ MHz ( SET )] key.
13 DC VLT
Function: Indicates the DC Supply Voltage.
14 DCS CD
Function: Setting of the DCS code.
Available Values: 104 standard DCS codes
Default: 023
023 025 026
071 072 073
143 145 152
225 226 243
266 271 274
356 364 365
452 454 455
532 546 565
703 712 723
15 DCS RV
Function: Enables/Disables "Inverted" DCS code decoding.
Available Values: ENABLE / DISABL
Default: DISABL
16 DIMMER
Function: Setting of the front panel display's illumination level.
Available Values: 0 (OFF) - 10
Default: 5
FT-2980R Operating Manual
DCS CODE
031 032 036
074 114 115
155 156 162
244 245 246
306 311 315
371 411 412
462 464 465
606 612 624
731 732 734
"Set" (Menu) Mode
043 047 051
116 122 125
165 172 174
251 252 255
325 331 332
413 423 431
466 503 506
627 631 632
743 754 -
053 054 065
131 132 134
205 212 223
261 263 265
343 346 351
432 445 446
516 523 526
654 662 664
- - -
65