Yaesu FT-2980R Operating Manual page 50

Internet Connection Feature
4. Rotate the DIAL knob to select "F" (representing DTMF
"#": the first digit of the DTMF string).
5. Press the [ LOW ( A/N )] key momentarily to accept the
first digit and move to the second digit of the DTMF
string.
6. Repeat the previous steps until you have completed the
access code ("#(F)1101D").
7. If you wish to attach an alpha/numeric name "Tag" to the
Internet Memory, proceed to the next step; otherwise
press and hold in the [ MHz ( SET )] key for one second to save the setting.
8. Press the [ MHz ( SET )] key twice to enable programming of the name tag (the Internet
Memory register number will blink).
9. P r e s s t h e [ D / M R ( M W ) ] k e y m o m e n t a r i l y. T h e
"- - ALPHA--" notation will appear on the display for 2
seconds, then the Memory register number will blink
again.
10. Press the [ MHz ( SET )] key momentarily. The first digit will blink.
11. Rotate the DIAL knob to select the first digit of the de-
sired label.
12. Press the [ LOW ( A/N )] key to move to the next charac-
ter.
13. If you make a mistake, press the [ REV ( DW )] key to back-space the cursor, then
re-enter the correct letter, number, or symbol.
14. Repeat steps 11 and 12 to program the remaining let-
ters, numbers, or symbols of the desired label. A total of
six characters may be used in the creation of a label.
15. When you have finished programming the label (6 char-
acters or less), press and hold in the [ MHz ( SET )] key for one second to confirm the
label.
16. Repeat steps 1 through 15 to store other access codes, if so desired.
17. Press the PTT switch to save the setting and exit to normal operation.
Operation (Accessing an FRG Node)
1. Press and hold in the [ MHz ( SET )] key for one second,
then rotate the DIAL knob to select "23 INT MD".
2. Press the [ MHz ( SET )] key, then rotate the DIAL knob
to set this Set Mode Item to "FRG" (thus activating the
"Other Internet Link System" mode).
3. Press and hold in the [ MHz ( SET )] key for one second to
save the new setting.
4. Press the [ ] key momentarily to activate the Internet
Connection feature. The "Int" notation will appear at the
right of the frequency.
46 FT-2980R Operating Manual