3.3 LAN
The LAN setup includes two parts – LAN Interface and DHCP Settings.
3.3.1 LAN Interface Settings
There are the IP settings of the LAN Interface for the device. These settings may be referred
to as Private settings. You may change the LAN IP address if needed. The LAN IP address
is provided to your internal network and cannot be seen on the Internet.
You can change the LAN IP address for your requirements. The default LAN IP is
192.168.1.1. You can also enable the Secondary LAN IP function in this page. It will allow
LAN Interface to have the alias IP for management.
IP Address: Enter the IP address of your ADSL router in dotted decimal notation, for
example, 192.168.1.1 (default setting).
Subnet Mask: Your ADSL router will automatically calculate the subnet mask based on the
IP address that you assign. Unless you are implementing sub netting, use the subnet mask
computed by the ADSL router.
Note
Please Commit/Reboot if you want to make this settings effective
immediately
22