Changing the IP Address
1
Click the
2
Click the TeraStation icon while holding down the control key, then choose Configure - IP Address.
3
Uncheck "Use DHCP", enter the desired settings, and enter the administrator password, then click Apply.
Note: The following IP addresses are reserved and should not be used. If you configure one of them by accident,
initialize IP address settings with the function button on the TeraStation.
Local loopback address: 127.0.0.1, 255.255.255.0
Network address: 0.0.0.0, 255.255.255.0
Broadcast address: 255.255.255.255, 255.255.255.0
The IP address range from 224.0.0.0 to 255.255.255.255
NovaBACKUP
NovaBACKUP is a Windows utility that lets you back up the data on your computer or TeraStations.
Installing from CD
The installation methods are different depending on which version of TeraNavigator CD you have. If your
TeraNavigator CD is version 1.10 or earlier, install NovaBACKUP from the included TeraNavigator CD.
1
Insert the TeraNavigator CD to your computer.
2
Launch TSNavi.exe from the TeraNavigator CD.
icon in the Dock to start NAS Navigator2.
117