Mount As Network Drive - Buffalo TeraStation 1000 User Manual

Name
To display these options,
hold down the control
key and click your
TeraStation's icon.
*"I'm here" is available on TS1400D and TS1400R models. When clicked, the TeraStation will beep and its power,
function, and drive status LEDs will blink red.

Mount as Network Drive

You can map the shared folder as a network drive using NAS Navigator2 on macOS.
1
Click the
2
Double-click the TeraStation icon or click the TeraStation icon while holding down the control key, then select
Open Folder. Enter a username and password with the rights to access the shared folder.
3
Select the shared folder that you want to mount, then click OK.
4
The shared folder is now mounted as a network drive.
Open Folder
Settings
Configure
I'm here
*
Label Color
icon in the Dock to start NAS Navigator2.
Description
Opens the TeraStation's shared folder.
Opens Settings for the selected TeraStation.
Opens a window that lets you configure NAS's IP address
or open Settings.
Causes your TeraStation to beep.
Selects the color of the name displayed below the icon.
116