Table of Contents
Advertisement
7.2 WEEE Waste Electric and Electronic Equipment
INFORMAZIONE AGLI UTENTI
In compliance with art.13 of the Legislative Decree n. 151 dated 25 July 2005,
"Implementation of the 2002/95/CE,2002/96/CE and 2003/108/CE
Directives, relative to the reduction of the use of dangerous substances in
electric and electronic appliances, as well as the disposal of waste"
The barred wheeley-bin symbol on the appliance or
the package indicates that at the end of the products useful life
span, it must be collected separately from other waste.
The recycling of this product at the end of its service life, is arranged for and carried
out by the manufacturer. The user who wishes to dispose of this product must
therefore contact the manufacturer and adhere to the system that he has adopted for
the correct disposal of this product at the end of its service life
The correct disposal of the old product for the processes of recycling, treatment and
compatible waste disposal will help prevent potential negative consequences for the
environment and human health, and will result in the reuse and recycling of the
materials and components which make up the appliance.
Abusive disposal of the appliance leads to the application of administrative
sanctions envisioned by the Standards in force.
AUTHORISED DEALER
20
VACUUM PACKAGING MACHINE
USE AND MAINTENANCE MANUAL
1
25
30
40
Advertisement
Table of Contents
Related Manuals for Sirman Easyvac 25
Summary of Contents for Sirman Easyvac 25
- Page 1 7.2 WEEE Waste Electric and Electronic Equipment INFORMAZIONE AGLI UTENTI In compliance with art.13 of the Legislative Decree n. 151 dated 25 July 2005, ”Implementation of the 2002/95/CE,2002/96/CE and 2003/108/CE Directives, relative to the reduction of the use of dangerous substances in electric and electronic appliances, as well as the disposal of waste”...
- Page 2 Obligations in the event of malfunctioning and/or potential dangers The operators must inform their direct seniors of any deficiency and/or potential dangerous situation that should occur. 6.1 - User obligations The user must inform the manufacturer immediately if any defects and/or malfunctioning of the accident-prevention system are detected, as well as any presumed dangerous situation of which he becomes aware.
-
Page 3: Table Of Contents
5.2- Maintenance INDEX 1. Clean the sealing bars and the silicon counter-bar more or less every 15 days using alcohol. Delivery and warranty 2. Change the oil every 400 hours of working (data variable depending on the type Foreword. of product packed). Preservation and use of this manual After 2000 cycles the machine envisions an automatic oil control, the display Warranty... -
Page 4: Vacuum Pump
Controls and maintenance 4.5 - Cleaning the machine Controls and maintenance ATTENTION! Maintenance Disconnect the machine from the mains electricity before cleaning. 5.2.1 Vacuum pump Do not clean the machine using a jet of water. Use non-toxic detergents only, expressly intended for clearing components coming Obligations in case of malfunctioning and/or potential dangers into contact with foodstuffs. -
Page 5: Delivery And Warranty
4.4 - Packaging liquids or semi-liquids Delivery and warranty With the dome vacuum packing machines we produce, it is possible to vacuum pack liquids and semi-liquids (soups, juices, sauces, etc…) lengthening their duration and 1.1 - Foreword maintaining flavour and hygiene unaltered. In these cases, remember that the bags must never be filled up to maximum limit, ATTENTION! but up to 50% of the capacity, making sure that the edge is at a higher level with... -
Page 6: Warranty
1.3 - Warranty 4.2 Chamber Vacuum Packing Cycle The Manufacturer is committed for 12 (twelve) months, from the date of shipping 1 - Press the general switch (right side of machine) and direct delivery of the goods, to guaranteeing the customer or authorised dealer Ref. -
Page 7: Description Of The Machine
The Manufacturer is not deemed liable for the consequences caused by the 4B Use of the machine user’s failure to comply with the safety precautions given in this manual. 4.1 - Control Panel Legend 1.5 - Description of the machine The vacuum packaging machine with dome is controlled electrically and therefore not subject to wear. -
Page 8: Lighting
6 always use protection fuses that are in compliance with the Safety Standards in Before carrying out any check that leads to the removal of some items, the plug force, with the correct value and suitable mechanical features; must be removed from the mains electricity. 7 avoid the use of repaired fuses and the creation of short circuits between the terminals on the fuse holders;... -
Page 9: Technical Features
1.8.1 - Warning and danger plates (Fig. 1.8.2) Inspection, transport, delivery and installation Fig. 1.8.2 3.1 - Inspection The machine you own has been inspected at our establishment in order to certify correct operation and adjustment. 3.2 - Delivery and handling the machine All material delivered has been accurately controlled before consignment to the carrier. - Page 10 2.2 - Technical features 2.4 - Wiring diagram Power Vacuum Sealing Cavity Power supply Oil tank capacity pump dimensions 0,1 Kw 4 mc/h 260 mm 270x350 h75 mm 230V/50Hz ml 60 0,1 Kw 4 mc/h 310 mm 336x378 h75 mm 230V/50Hz ml 60 0,35 Kw...
Need help?
Do you have a question about the Easyvac 25 and is the answer not in the manual?
Questions and answers