STACKER SuperDrive Extruder Upgrade Kit Installation Manual page 7

Table of Contents

Required Tools1
Step 1. Check Upgrade Kit Assembly2
Step 2. Remove Filament Guide Tube2
Step 3. Install Spacer Shim3
Step 4. Loosen the Four Motor Screws3
Step 5. Remove Belt4
Step 6. Detach the Large Pulley4
Step 7. Remove Extruder Assembly5
Step 8. Install New Superdrive Extruder Assembly5
Step 9. Reattach the Large Pulley6
Step 10. Reattach and Retension Belt6