Cleaning The Filter - Bissell 2112 SERIES User Manual

Cleaning the Filter

WARNING
To reduce the risk of electric shock, turn power switch OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
WARNING
Do not operate vacuum with damp or wet filters, as well as without filters or the Dirt
Container in place. Allow components to dry before reassembling the Dirt Container.
1
Remove Dirt Container by pushing the
Dirt Container Release Button on top
of the tank handle.
3
Grasp the filter and pull to remove. The
filter can be washed by hand-warm
water. Mild detergent may be used.
Rinse well, then air dry completely
before returning to dirt container lid.
NOTE: If the filter is still excessively dirty, damaged or torn, it will need to be
replaced.
10
www.BISSELL.com
2
The filter is located inside of the dirt
container lid. Open dirt container lid
by lifting the release latch.
4
Place the filter back in the dirt container
lid. The white mesh side should be put in
first with the black foam side still visible.
Align the locating details on the filter
with the locating features in the tank lid.