Using Your Cleaner - Bissell 2112 SERIES User Manual

Using Your Cleaner

WARNING
Before using your vacuum, make sure that the dirt container is in locked position and
that all filters, both pre and post-filters are in place. DO NOT operate your vacuum without
these filters.
1
Twist the Upper Quick
Release™ Cord Wrap down
to quickly remove cord.
4
NOTE: Some berber carpets have a tendency to fuzz with wear. Repeated strokes
in the same area may enhance this condition.
6
www.BISSELL.com
2
Connect power cord plug
to a polarized outlet.
Press the handle recline
pedal with your foot to
place your vacuum in one
of three positions:
Upright - For storage and
transporting.
Normal Cleaning - Press
handle release pedal once
for most household floor
cleaning tasks.
Low Cleaning - With
the vacuum in normal
cleaning position, press
handle release pedal again
for reaching under low
furniture, such as tables,
chairs, or beds.
3
Step on the red power
switch on the back to
turn the unit ON.
5
To turn the unit OFF,
step again on the red
power switch on the
back of the unit, found
under the cord wraps.