Emptying The Dirt Tank; Cleaning The Pre-Motor Filter - Bissell CLEANVIEW 3533 Series Quick Start Manual

Emptying the Dirt Tank

We have additional tips for maintaining your machine at support.BISSELL.ca.
1. 2.
Press the tank release button Hold the dirt tank over a trash
and pull out to remove dirt bin. Press the bottom release
tank. button to empty.
4. 5.
Clean cyclone with warm Twist cyclone clockwise to
water and mild detergent. reinstall.
Let dry for 24 hours before
reinstalling.

Cleaning the Pre-Motor Filter

Find replacement filters at BISSELL.ca.
1. 2.
Press the tank release button Lift release latch to access
and pull out to remove dirt filter. Remove foam filter from
tank. lid.
WARNING
To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting checks.
3.
Twist cyclone counter-
clockwise and pull down to
remove from tank.
6.
Place tank back on vacuum
and press firmly until it clicks
into place.
3.
Hand wash in warm water
and rinse well; mild detergent
may be used if desired. Let dry
for 24 hours before reinstalling.
BISSELL.ca 5