Boot Failures - Planar Clean Screen C3012T User Manual

Boot Failures

The System BIOS attempts to display an error message on the display and halts when it
encounters the following error conditions.
1. Fixed disk error
Causes:
• No drive connected
• Configured for 0 cylinders
• Controller reset failed
• Drive not ready
• Track 0 seek timed out
• Drive initialization failed
• Drive recalibration failed
• Last track seek failed
2. CMOS checksum failed
Causes:
• CMOS checksum failed
3. Timer error
Causes:
• System timer (0) failed
4. I/O error
Causes:
• I/O conflicts exist for serial and parallel ports, hard disk (any or all)
5. Over Temperature Error
Causes:
• Internal temperature exceeded 50˚C causing the system to shut down
6. Other error
Causes:
• Peripheral components IRQ conflicts
The System BIOS prints an error message but does not halt when it encounters the following
error conditions.
1. RTC error
Causes:
• RTC lost power
2. CMOS error
Causes:
• RTC battery failed
3. Configuration error
Causes:
• User BIOS Extension Region X will exceed DFFFFH
Appendix C: Troubleshooting
37