Installing An Isa Adapter Card - Planar Clean Screen C3012T User Manual

Installing an ISA Adapter Card

Figure 9
Do not remove the T-Bar or standoffs.
1. Remove the back housing as above.
2. Remove the blank metal spacer from the ISA panel slot using the T10 torx driver.
3. Locate the ISA connection beneath the T-Bar.
4. Turn the 1 ⁄ -card size ISA board upside down as you orient it toward the connection and the
2
ISA panel slot.
5. Slide the card under the T-Bar, into the ISA connector and the ISA panel slot.
6. Tighten the torx screw on the ISA panel slot.
7
Chapter Three: Hardware Installation and Replacement