Replacing The Battery - Planar Clean Screen C3012T User Manual

Replacing the Battery

Battery
(Rayovac BR2335
or equivalent)
Figure 12
Battery: Rayovac BR2335 or equivalent.
1. Remove the back housing as above.
2. Gently pulling up on the battery bracket, remove the old battery.
3. Slide in a new battery.
4. Upon startup, the system defaults will load. Enter Setup and go to the Exit menu to restore
the CMOS settings saved in your flash memory. See Chapter Five: BIOS Setup for details.
Technical Note:
flash memory. See Chapter Five: BIOS Setup.
10
Planar Clean Screen PC User's Manual
Before removing the battery you must ensure the CMOS is backed up in