TomTom BANDIT Reference Manual page 37

Tip: When airplane mode or flight mode is switched on, an airplane icon is shown on the Camera
Status screen and all Bluetooth low energy (also known as BLE or Bluetooth® Smart) connectivity
is disabled.
Options
Important: You can also change a large range of settings using the MOBILE APP on your smartphone.
From the Camera Status screen on your camera, move down to open the SETTINGS menu. Select
GENERAL then select OPTIONS.
Use these settings to select the general options for your camera, such as language and units.
Language
Select LANGUAGE to set the language used for menus and messages on your camera.
Units
Select UNITS to set the units to KM (metric) or Miles (imperial).
REVIEW QUESTION: NO nautical miles for this release?
Sound
Select SOUND to switch the buzzer sound on the camera ON or OFF.
When the camera is out of your sight, for example when mounted on your helmet, the buzzer tells
you when the camera has started and stopped recording, when the power is switched on or off, and
if a camera notification arrives.
You may wish to turn the buzzer off if you need silence when recording, for example, when riding
through a landscape with wildlife.
Note: This setting does not control the audio recordings made while videoing.
Light
Select LIGHT to switch the LED lights on the camera ON or OFF.
Tip: Switching the LEDs off will save battery power.
Reset
Select RESET to choose from two reset options:
RESET ALL - resets your camera to the factory settings and restarts the camera.

Note: A reset does not delete your photos and videos stored on the memory card.
RESET WIFI - resets your Wi-Fi password.

Storage
Using the STORAGE settings you can delete items from the memory card and format the memory
card.
Deleting the last file
1. From the Camera Status screen on your camera, move down to open the SETTINGS menu.
2. Select GENERAL then select STORAGE.
3. Select DELETE LAST.
37