Receiving Updates; Caring For Your Camera - TomTom BANDIT Reference Manual

Receiving updates

Firmware Updates
Your camera may detect a new firmware version on the
re-inserted.
The update installs and saves your last-used camera settings. When the update has successfully
installed the update, you get a message.
Note: If your camera cannot install the update because, for example, the battery level is too low,
you are warned and given instructions on how to fix the problem.
QuickGPSFix updates
In the following situations, your camera uses QuickGPSFix to help find your position:
 The camera isn't used for a long time.
The camera is out of coverage for more than one week.

The camera is restarted more than 500km away from your previous position.

QuickGPSfix contains information about satellite positions which helps your Bandit find your position
faster.
Tip: QuickGPSFix information is stored in a separate folder from your videos and photos.
Your camera receives QuickGPSFix updates when connected to the DESKTOP APP or when using the
MOBILE APP.

Caring for your camera

It is recommended that you clean your camera once a week if you use it frequently.
 Wipe the camera with a damp cloth as needed. Use mild soap to remove oil or dirt.
Important: Do not clean the lens or lens cover with a normal cloth. Use only a cloth and spray
specifically made for cleaning camera lenses.
Clean the lens cover and the lens using a cloth and spray specifically made for cleaning camera

lenses.
Do not expose your camera to strong chemicals such as gasoline, cleaning solvents, acetone,

alcohol, or insect repellents. Chemicals can damage the camera's seals, case, and finish.
After using your camera in water, rinse your camera with tap water and dry it with a soft cloth.

Important: If you remove the battery stick be extra careful not to let dirt or water enter the
camera or the battery stick. Only remove the battery stick in clean and dry conditions.
microSD card after the battery stick is
22