Switching On And Off - TomTom BANDIT Reference Manual

5. Mount the camera on the camera platform.
6. Push down the lever to lock the mount.
Note: To remove the mount, reverse the above instructions.

Switching on and off

Switching on your Bandit
Press the START button (button 2) at the back of the camera for 2 seconds to switch your camera
on. If no SD card is inserted into the battery stick, you are asked to insert one so that the camera
can switch on.
If the camera is in standby mode, press the control button (button 5) to wake up the camera.
Switching off your Bandit
Press the STOP button (button 1) at the front of the camera for 2 seconds to switch off the camera.
11